No N.radio Connection - Bang & Olufsen beosound 5 Service Manual

Fault symptom:

No N.Radio connection

Possible causes, defective:
Ethernet cable
Network installation
PCB01, Motherboard
Wireless USB Network Adapter
Is the network
solution wireless?
Go to next
page
*
Remove ethernet
cable from RJ45
Contact the
socket on
BeoMaster 5 and
connect it to a PC. administrator
Is the internet
connection ok?
Reconnect to RJ45
socket on
BeoMaster 5. Does Replace PCB01,
the green status Motherboard
LED in RJ45 socket
light green?
Reconnect to RJ45
socket on
BeoMaster 5. Does
Replace PCB01,
the green status Motherboard
LED in RJ45 socket
light green?
Enter Service mode and click the Network
Connection icon. Right-click on Local Area
Is the network
connection DHCP
Choose Internet Protocol (TCP/IP) and click
supportet?
Properties**. Confirm the settings are corret.
Enter Service mode
and click the
Network
Replace PCB01,
Connection icon.
Motherboard
Right-click on Local
Area Connection
and choose
Repair.*
OK?
Network Connections / Local Area Connection
network
Connection and choose Properties.*
OK?
Right-click on Local
Area Connection
and choose
Repair.*
OK?
**
Fault flow chart
Correct the settings
and click OK twice.
Click the Exit
Service Menu icon
to return to normal
state
Replace PCB01,
Motherboard
LAN Properties
3.9