(alphanumeric format) or Hexadecimal digits ('A-F', 'a-f' and '0-9'). No matter what type
you select, input 64 Hex values (in the 'A-F', 'a-f' and '0-9' range) or 8-63 ASCII characters.
You can also use WPS to encrypt your network. WPS can connect the wireless adapter and the
router in a safe way. If you have a wireless network card which has WPS button, you may set up
a safe network via the following methods
Note: the WPS PIN is on the bottom of the router
Method 1:
Push the WPS hardware button of the Router until the orange WPS LED flashes
Push the WPS button in the wireless network card for about 3-5 seconds
The safe connection will be established automatically, please wait
Method 2:
Check 'Input PIN from AP' in the wireless adapter's WI-FI protect setup page, input PIN
of the router, then click 'PIN Input Config (PIN)'
Wireless 11N 150Mbps Broadband Router Quick Installation Guide
Figure 6-5
Figure 6-6
7
Need help?
Do you have a question about the RP-WR5441L and is the answer not in the manual?