Advanced Setting; Restore To Factory Setting - Repotec RP-WR5441L Quick Installation Manual

Wireless 11n 150mbps ap router
Hide thumbs Also See for RP-WR5441L:
Table of Contents

Advertisement

If you are still not connected, your modem may actually have the same IP as the router
(192.168.1.1). You will need to change the router's IP. Click on 'LAN Setup'- 'LAN IP
Address' and you will see this IP in the main interface. You may edit it to something different
(192.168.2.1 for example). After entering the new IP, click on 'Save' below, the router will
reboot, and you will need to enter the user name and password again. Check your system status
for IP again, and test connection.
Note: You will need to enter the new IP in the browser to access the user interface for any
future setting changes.
Now you can enjoy your new network. If you have anything related to the questions below,
please refer to the following part

6.2. Advanced setting

6.2.1.

Restore to factory setting

If the router ever freezes in a setting change process or if you can't access it because you can't
Wireless 11N 150Mbps Broadband Router Quick Installation Guide
Figure 6-2
Figure 6-3
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RP-WR5441L and is the answer not in the manual?

Table of Contents