Table of Contents
Advertisement
10. CONNECT USING WIFI
Once your Gateway is set up, you can switch to using WiFi and connect to the Internet
anywhere in range of your WiFi signal. To connect with WiFi, you need a wireless enabled
device such as a computer, tablet, printer or mobile phone.
Your Gateway has a unique Network Name (SSID) and Wireless Key (Password)
pre-installed. These details can be found on the information label on the bottom
of the Gateway and on the WiFi sticker supplied in the box.
technicolor
TG589vn v2
Use Technicolor power
supply model DSL36849990
w i t h t h i s p r o d u c t .
Network Name (SSID): TELECOM123456
Wireless Key (Password): 1234ABCDEF
Rated Input: 12V
The pre-installed Network Name and Wireless Key provide a strong level of network
security if you keep this information safe. Using these values you can connect any
wireless device using the device's WiFi connection manager or wizard.
Before starting, ensure:
1.
The WiFi Button light on the front of the Gateway is GREEN. If not, press the WiFi
Button light to turn WiFi on.
2. The connecting device has WiFi turned on.
3.
Your computers operating system and the wireless network drivers are up to date.
Many wireless issues are caused by out of date operating systems and drivers.
4. If you need support for your device or operating system, contact the device supplier
or manufacturer, visit their website or refer to the user manual or help function.
10
5-0 TEL0592 DEVICE QSG Business VDSL TG589 Modem.indd 10
N10406
This Technicolor TG589vn v2
VDSL2 Residential Gateway
may be connected to the
Telecom Network
PTC 274 / 12 / 001
wireless user codes
CERTIFIED
1.5A
Important information for the set up
of your wireless network. Please do
not dispose and keep in a safe place.
Network Name (SSID): TELECOM123456
Wireless Key(Password): 1234ABCDEF
5/11/13 12:03 PM
Advertisement
Table of Contents
