Fuse - Toro 74105 Operator's Manual

Fuse

Service Interval/Specification
The electrical system is protected by fuses. It requires
no maintenance, however, if a fuse blows check
component/circuit for malfunction or short. To
replace fuses pull up on the fuse (Fig. 34) to remove
or replace it.
Fuse: Main/Starter F1–30 amp, blade-type
Alternator F2–25 amp, blade-type
Hour meter/Clutch F3–10 amp, blade-type
Starter relay F4–7.5 amp, blade-type
m–3086
Figure 34
1. Main/Starter-30 amp
2. Alternator-25 amp
4
3
2
1
3. Hour meter/Clutch-10 Amp
4. Starter relay-7.5 Amp
Maintenance
33