Toro 74105 Operator's Manual page 17

Stopping
1. Move the throttle lever to "SLOW" (Fig. 5).
2. Turn the ignition key to "OFF" (Fig. 6).
Note: If the engine has been working hard or
is hot, let it idle for a minute before
turning the ignition key "OFF." This
helps cool the engine before it is
stopped. In an emergency, the engine
may be stopped by turning the ignition
key to "OFF."
3. Pull wire off spark plug(s) to prevent possibility
of accidental starting before transporting or
storing machine.
4. Close fuel shut off valve, under fuel tank, and
cap vent before transporting or storing machine.
IMPORTANT: Make sure fuel shut off valve
and cap vent are closed before transporting or
storing machine, as fuel leakage may occur.
Operation
15