Changing The Engine Oil Filter - Toro 74730 Operator's Manual

4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark
A
C
E
Figure 32

Changing the Engine Oil Filter

Service Interval: Every 200 hours—Change the oil filter.
(more often in dusty, dirty conditions)
Note: Change the engine oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to
Engine Oil (page 30).
2. Change the engine oil filter
(Figure 32).
B
D
F
g027660
Changing the
(Figure 33).
A
C
E
g027477
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to Servicing the Engine Oil (page
31
B
D
F
3/4
Figure 33
29).