Product Overview; Controls - Toro 74266 Operator's Manual

Product Overview

1. Motion control lever
2. Parking brake lever
3. Height-of-cut lever
4. Fuel cap (both sides)

Controls

Become familiar with all the controls before you start the
engine and operate the machine (Figure 3 and Figure 4).
1. Hour meter
2. Ignition switch
3. Glow plug switch
4. Glow plug light
5. Engine Temperature light
Figure 3
5. Controls
6. Seat belt
7. Roll bar
8. Engine screen
Figure 4
6. Throttle control
7. PTO Switch
8. Audible alarm
9. Fuel selector valve
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 4).
Glow Plug Light
The glow plug indicator light turns on when the glow
plug button is engaged (Figure 4).
Glow Plug Switch
This switch activates the glow plugs and is indicated by
the glow plug light. Hold down the glow plug switch for
10 seconds prior to starting.
Temperature Light
The temperature light comes on when the engine is over
heating (Figure 4).
Audible Alarm
This machine has an audible alarm that alerts the user
to turn off the engine or engine damage can occur from
over heating. Refer to Servicing the Cooling System in
Cooling System Maintenance , page 41.
Fuel Selector Valve
The fuel selector valve is located behind the seat.
Close the fuel selector valve when transporting or
storing mower.
Move the selector valve to the lefthand (LH) or
righthand (RH) position for operation.
13