Toro 30881 Operator's Manual page 15

Weight gauge
Indicates when the seat is adjusted to the weight of the
operator (Figure 12). Height adjustment is made by
positioning the suspension within the range of the green
region.
Figure 12
1. Weight gauge
2. Weight-adjusting lever
3. Seat adjusting lever
Weight-Adjusting Lever
Adjust for your weight (Figure
increase the air pressure and push down to decrease the air
pressure. You attain the proper adjustment when the weight
gauge is in the green region.
4. Seat back adjusting lever
5. Arm rest adjusting knob
(not shown-located under
arm rest)
12). Pull up the lever to
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics and
other information about the machine
splash screen and main information screen of the InfoCenter.
Press any of the InfoCenter buttons and then select the
appropriate directional arrow to switch between the splash
screen and the main information screen.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press to access
the InfoCenter menus. You can use it to back out of any
menu you are currently using.
•
Middle Button—press to scroll down menus.
•
Right Button—press to open a menu where a right arrow
indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note: The purpose of each button may change
depending on what is required at the time. Each button is
labeled with an icon displaying its current function.
15
(Figure 13). There is a
g020650
2
3
Figure 13
3. Middle button
4. Left button