Sound Pressure; Sound Power; Vibration, Hand/Arm; Safety And Instructional Decals - Toro 22177TE Operator's Manual

Sound Pressure

This unit has an equivalent continuous A-weighted
sound pressure level at the operator ear of 88 dBA,
based on measurements of identical machines per
EN 11094 and EN 836.

Sound Power

This unit has an equivalent continuous A-weighted
sound power level of 98 dBA, based on

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost.
Manufacturer's Mark
1. Indicates the blade is identied as a part from the original
machine manufacturer.
1. Choke
2. Fast
3. Continuous variable setting
98-2048
4. Slow
5. Engine—stop
6. Set the throttle lever to the
Choke position, pull the
cord to start the engine,
then move the throttle to
the Fast position.
measurements of identical machines per EN
11094.

Vibration, Hand/arm

This unit does not exceed a hand/arm vibration
level of 5.5 m/s 2 , based on measurements of
identical machines per EN 1033.
7. Release the bail to disengage
the cutting blade.
8. Move the bail up to engage
the cutting blade.
9. Move the bail to the handle
to engage the traction drive.
6
10. Forward speeds
11. Neutral