Using remote controller
RCVR
CH
56
Overview
The RC-460M remote controller is a useful tool to help you operate
the components of your home theater. To do so, first press the Mode
button that corresponds to the device you wish to control. Then
simply press the desired operation button and the component will
operate accordingly. For example, if you wish to select the CD input
source at the TX-DS797 with the remote controller, first press the
RCVR MODE button to select the TX-DS797 and then press the CD
(INPUT SELECTOR) button.
1. Press the RCVR MODE button.
2. Press the TUN input selector button.
3. Press the CH
TUN
The
connected to the TX-DS797 (see page 14).
1. Press the RCVR MODE button.
2. Press the desired operation button.
RCVR
Operation buttons:
VOL
MUTING
TAPE
operation
buttons
track.
R (Rec): Record/Pause
You may also use the following buttons:
VOL
MUTING: Activates the muting function at the TX-DS797
Note:
Even for devices with the
may cause them not to work properly.
Calling up a preset radio station
The RCVR MODE button lights green.
or
button to select the desired
preset station number.
Controlling an Onkyo cassette tape deck
connector of the Onkyo cassette tape deck must be
The RCVR MODE button lights green.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo cassette tape deck.
: Play
: Stop
: Rewind
: Fast forward
: Press during playback to skip to the beginning of the next track.
: Press during playback to skip to the beginning of the current
: Reverse playback
: Adjusts the volume at the TX-DS797
and
buttons, signal discrepancies