Earthing Instructions; Installation - Sanyo EM-N200 Instruction Manual

This appliance must be earthed. If there is an
electrical short circuit, earthing reduces the risk of
electric shock by providing an escape wire for the
electric current, This appliance is equipped with a
cord that has a earthing wire with a earthing plug.
The plug must be plugged into an outlet that is
properly installed and earthed.
The electrical power cord must be kept dry and
must not be pinched or crushed in any way,
WARNING - Improper use of the ear-thing
plug can result in electric shock.
I
I
Remove all packing material and accessories,
Examine the oven for any damage such as dents
or a broken door. Do not install if oven is damaged.
1.
2.
Select a level surface that provides enough
open space (see illustration at right) for the
inlet and/or outlet vents.
Leave a minimum clearance of 7.5 cm above
the oven.
Do not remove the legs from the bottom of the
oven.
Blocking the inlet and/or outlet openings can
damage the oven.
Do not install oven over a range, cooktop or
other heat-producing appliance.
Place the oven as far away from radios and
T,V.'S as possible.
When the cabinet is covered with a protective
film, remove the film to fully show the intended
colour and finish.
Plug your oven into a standard household
outlet. Be sure that your microwave oven is the
only appliance on the circuit.
When installing in a "Built-in" situation, you must
allow a minimum of 7.5 cm on each side and the
top and at the back of the microwave oven for
ventilation. Failing to do so might cause damage
to the microwave oven.
A minimum clearance of 7.5 cm is required
k~etween the oven and any adjacent walls
Including the back wall.
3