Odours; Light (Led) - Siemens KI39F Series Instructions For Use Manual

Hide thumbs Also See for KI39F Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
en
Taking out the humidity filter
Fig. 1/21
The humidity filter over the humidity
container can be taken out for cleaning.
To do this, first take out the humidity
container and pull out the humidity filter.
Lift off the filter cover, Fig. +, and take
out the filter. Clean in lukewarm water,
leave to dry and re-assemble.
Remove telescopic rails
Fig. .
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear
pin.
4. Push telescopic rail together, push
backwards above the rear pin
and disengage.
Installing telescopic rails
1. Place the extended telescopic
rail on the front pin.
2. Pull the telescopic rail forwards
slightly until it engages.
3. Place telescopic rail on the rear pin.
4. Push lock backwards.
40

Odours

If you experience unpleasant odours:
1. Switch off the appliance with the On/
Off button. Fig. 1/9.
2. Take all food out of the appliance.
3. Clean interior (see chapter "Cleaning
the appliance").
4. Clean all packages.
5. Seal strong smelling food in order
to avoid odours from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation
of odours is still occuring after
24 hours.
9. Change odour filter, Fig. -.
The odour filter is situated behind
the upper "cool-fresh" container.
Replacement filters are available from
your customer service.

Light (LED)

Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ki34np60

Table of Contents