User's Manual
1. Service Precautions (at setup time)
【
Prohibited
for malfunctions:
•
Direct sunlight, near air conditioners or outside.
•
High humidity, such as those near a water supply or humidifier, or any place with water,
oil, or chemicals.
•
Avoid contact with dust, waste particles, near open windows, or locations with any toxic
gases or iron powder.
•
Secure electrical cord so it cannot be detached easily.
Also, do not install the printer near any televisions, radios, speakers, short-wave radios, or
anything that is magnetic or emits radio waves. If you use it adjacent to any of these items,
it can interfere with reception.
2. Installation Space
【
Caution
】
•
The product must be installed on a level surface. Otherwise, it could prevent normal
printing or be the cause of an unexpected accident or break-down.
•
To relieve the internal heat, secure at least a 4-inch (10 cm) space around the perimeter
of the enclosure.
•
Install close from electrical outlet and make sure connection is firmly secured.
•
It is recommended to place the continuous form at the back of the printer so that the
printer can pull up and wind the form into the printer smoothly.
Chapter 2 – Setup
】
:Avoid use of the printer in the following areas they may be cause
:Install the product in a location which meets the following criteria:
P a p e r
© Nippon Telesoft Co., Ltd. March 2003.
B r a i l l e P r i n t e r
5
T a b l e