Enjoying Home Theater; Speaker Sets A And B - Onkyo TX-SR504E Instruction Manual

Enjoying Home Theater

Speaker Sets A and B

You can use two sets of speakers with the AV receiver: speaker set A and speaker set B.
Speaker set A should be used in your main listening room for up to 7.1-channel playback.
*While speaker set B is on, speaker set A is reduced to 5.1-channel playback.
Speaker set B can be used in another room and offers 2-channel stereo playback.
*Only analog input sources are output by speaker set B.
AV receiver
controller
SPEAKERS
A B
or
Front left and right speakers
These output the overall sound. Their role in a home theater is to provide a solid anchor
for the sound image. They should be positioned facing the listener at about ear level,
and equally spaced from the TV. Angle them inward.
Center speaker
This speaker enhances the
front left and right speakers,
making sound movements
distinct and providing a full
sound image. For movies it's
used mainly for dialog.
Position it close to your TV
facing forward at about ear
level, or at the same height
as the front left and right
speakers.
Subwoofer
The subwoofer handles the
bass sounds of the LFE (Low-
Frequency Effects) channel. In
general, a good bass sound
can be obtained by installing
the subwoofer in a front corner,
or at one-third the way along
the wall, as shown.
Speaker Set B: Sub Room
6
Speaker set A
Remote
On
Off
Corner
1/3 wall
length
Speaker set B Indicator
On
A
Off
A
On
Off
Speaker Set A: Main Room
Surround back left and right
speakers
These speakers further enhance the
realism of surround sound and
improve sound localization behind the
listener. Position them behind the lis-
tener about 2–3 feet (60–100 cm)
above ear level.
Surround left and right speakers
These speakers are used for precise sound
positioning and to add realistic ambience. Posi-
tion them at the sides of the listener, or slightly
behind, about 2–3 feet (60–100 cm) above ear
level. Ideally they should be equally spaced
from the listener.
Output
Set A: 5.1 channels
B
Set B: 2 channels
Set A: 7.1 channels
B Set B: 2 channels
No sound
* While speaker set B is on, these
speakers output no sound.