Operation; Think Safety First; Controls - Toro ProLine 30187 Operator's Manual

Operation

Think Safety First

Please carefully read all the safety instructions and
symbols in the safety section. Knowing this
information could help you, your family, pets or
bystanders avoid injury.

Controls

Become familiar with all the controls (Fig. 9) before
you start the engine and operate the machine.
Throttle Control – The throttle control has three
positions: "FAST", "SLOW" and "CHOKE".
Blade Control Bail – Control bail used in
conjunction with deck engagement switch (PTO) to
release blade brake and engage clutch to drive mower
blades. Release bail to disengage mower blades.
Blade Control Switch (PTO) – Rocker switch used
in conjunction with control bail to release blade brake
and engage clutch to drive mower blades.
Upper Control Bar – Push forward on control bar to
engage forward traction operation, release to stop.
Pull back on control bar to go backwards. Release
either side of control bar to turn right or left.
Reference Handle – Limits forward travel of control
bar to pre-set position to help maintain desired
ground speed and direction of travel. It is locked in
position with quick release levers.
Ignition Switch – Key switch is used with the
electric starter. Switch has three positions:
"START","RUN" and "OFF".
Fuel Shut–off Valve – (Under fuel tank) Close fuel
shut–off valve when transporting or storing mower.
Hour Meter – Shows total hours that machine has
been operated. Only operates with ignition key in
"ON" position.
4
5
8
3
Figure 9
1. Throttle control
2. Blade control bail
3. Blade control switch
(PTO)
4. Upper control bar
2
7
6
1
m–3112
5. Reference handle
6. Quick release lever
7. Ignition switch
8. Hourmeter
15