Spektrum SPMVR2500 Instruction Manual page 9

Table of Contents

Advertisement

Available languages

Available languages

Spektrum FPV Troubleshooting
Problem
No image, display is com-
pletely dark
No image, display is
glowing dark gray
Static on all channels
Horizontal lines in the
headset display
Blurry Image
Head tracker not working
but can hear beeps
Possible Cause
No power supplied to the
video transmitter or headset
Video source switch is set
to external receiver mode
Video transmitter power
is off
Digital interference on the
selected channel
Image is out of focus
Servos plugged into the
wrong channels
Head set was turned on
after radio
9
Solution
Check the power
connections
Make sure the battery is
fully charged
Ensure the video source
switch is switched to
headset mode
Make sure the video trans-
mitter LED is on
Choose a cleaner channel
Rotate the lens slowly to
focus the camera
Plug servos into the correct
channels
Turn headset on before
RC radio
EN

Advertisement

Table of Contents
loading

Table of Contents