Replacing The Propeller - TOHATSU M4C Owner's Manual

INSPECTION AND MAINTENANCE

Replacing the propeller

!
Do not begin propeller removal and
installation procedure with spark
plug caps attached, shift in forward
or reverse, main switch at other than
"OFF", engine stop cord attached to
the switch, and starter key attached, or
engine could accidentally start leading
to serious personal injury. Disconnect
battery cable if possible.
!
Do not hold propeller with hand(s)
when loosening or tightening propeller
nut. Put a piece of wood block
between propeller blade and anti-
ventilation plate to hold propeller.
!
• Do not install propeller without
thrust holder, or propeller boss
could be damaged.
• Do not reuse split pin.
• After installing split pin, spread the
pin apart to prevent it from falling
out which could lead to the propeller
coming off during operation.