Tv Format Setup (Not North American Models) - Onkyo TX-SA806 Instruction Manual

First Time Setup—Continued
TV Format Setup
(not North American models)
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [q]/[w] but-
tons to select "6. Miscella-
neous", and then press [ENTER].
The "Miscellaneous" menu appears.
3
Use the Up and Down [q]/[w] but-
tons to select "2. OSD Setup",
and then press [ENTER].
The "OSD Setup" menu appears.
48
6. Miscellaneous
1. Volume Setup
2. OSD Setup
6–2. OSD Setup
Immediate Display On
Monitor Type 16 : 9
Display Position Bottom
TV Format Auto
Language English
4
Use the Up and Down [q]/[w] but-
tons to select "TV Format", and
then use the Left and Right [e]/
[r] buttons to select:
Auto: Select this to automatically
NTSC: Select if the TV system in
PAL: Select if the TV system in
5 When you've finished, press the
[SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
detect the TV system from the
video input signals.
your area is NTSC.
your area is PAL.