Pedestal Setting (B) - Panasonic TH-42PW6EX Service Manual

10.2. Pedestal setting (B)

INPUT Equipment
1 RGB(PC)
Gray Scale
Pattern
Black 2 %
Black 0 %
2 Component
(525i, 525p, 625i,
720i or 1080i)
Gray Scale
Pattern
Black 2 %
Black 0 %
Note:
OSD is the difference between UY model and Except UY model.
Picture: Normal (Except UY)/Standard (UY model)
White balance (Except UY)/Color Temp (UY model)
Setting Alignment menu
Picture: PANEL W/B
Normal R cut off 1) Press the SWAP button, change input to signal path.
White balance: G cut off
B cut off
Cool
Aspect:
Chroma Control:
16:9 Gun off 3) Set Gun off to " 5 ". (Only green pixels can emit.)
COMPONENT
RGB Sub Adjust:
/RGB-IN: RGB
G Sub Bright 2 4) Adjust G Sub bright to start some of green pixels emission
Chroma Control:
Gun off 5) Set Gun off to " 3 ". (Only blue pixels can emit.)
RGB Sub Adjust:
B Sub Bright 2 6) Adjust B Sub bright to start some of blue pixels emission
Chroma Control:
Gun off 7) Set Gun off to " 6 ". (Only red pixels can emit.)
RGB Sub Adjust:
R Sub Bright 2 8) Adjust R Sub bright to start some of red pixels emission
Picture:
Normal PANEL W/B
White balance: R,G,B cut off 2) Repeat procedure 1) to 7) of RGB input signal.
Cool PANEL W/B
Aspect: R,G,B Drive
16:9
TH-42PW6EX / TH-42PW6BX / TH-42PWD6EX / TH-42PWD6BX / TH-42PWD6UY
** Adjust at the dark room.
2) Set R,G and B cut off to "
at black 2% area and no emission at black 0% area.
at black 2% area and no emission at black 0% area.
at black 2% area and no emission at black 0% area.
1) Change input to Component signal.
17
Procedure