Alignment; Pedestal Setting - Panasonic TH-42PW5 Service Manual

10 Alignment

10.1. Pedestal setting

INPUT Equipment
1 Component
(525i, 525p, 625i,
720i or 1080i)
Gray Scale
Pattern
Black 2 %
Black 0 %
2 RGB(PC)
Gray Scale
Pattern
Black 2 %
Black 0 %
Note:
OSD is the difference between UY/UZ model and Except UY/UZ model.
Picture:Normal (Except UY/UZ)/Standard (UY/UZ model)
White balance (Except UY/UZ)/Color Temp (UY/UZ model)
Setting Alignment menu
Picture: PANEL W/B
Normal R cut off 1) Set R,G and B cut off to " 80 ".
White balance: G cut off
Cool B cut off
Aspect:
Chroma Control:
16:9 Gun off 2) Set Gun off to " 5 ". (Only green pixels can emit.)
RGB Sub Adjust:
G Sub Bright 3) Adjust G Sub bright to start some of green pixels emission
Chroma Control:
Gun off 4) Set Gun off to " 3 ". (Only blue pixels can emit.)
RGB Sub Adjust:
B Sub Bright 5) Adjust B Sub bright to start some of blue pixels emission
Chroma Control:
Gun off 6) Set Gun off to " 6 ". (Only red pixels can emit.)
RGB Sub Adjust:
R Sub Bright 7) Adjust R Sub bright to start some of red pixels emission
Picture:
Normal PANEL W/B
White balance: R,G,B cut off 2) Repeat procedure 1) to 7) of Component input signal.
Cool PANEL W/B
Aspect: R,G,B Drive
16:9
** Adjust at the dark room.
at black 2% area and no emission at black 0% area.
at black 2% area and no emission at black 0% area.
at black 2% area and no emission at black 0% area.
1) Change input to RGB signal.
17
TH-42PW5 / TH-42PWD5 / TH-37PW5 / TH-37PWD5
Procedure