5
Greasing the Machine
No Parts Required
Procedure
Before operating the machine, it must be greased
to ensure proper lubricating characteristics; refer to
Greasing the Bearings and Bushings. Failure to properly
grease the machine will result in premature failure of
critical parts.
Product Overview
Specifications
Note: Specifications and design are subject to change
without notice.
Width of
60 inches (1.52 m)
Cut
Height
Adjustable from 1 to 5 inches (25 to 127 mm) in 1/2
of Cut
inch (13 mm) increments
Net
450 lb. (204 kg)
Weight
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
11