Toro 30366 Operator's Manual page 5

• Keep your body and hands away from pin hole
leaks or nozzles that eject hydraulic fluid under high
pressure. Use paper or cardboard, not your hands,
to search for leaks. Hydraulic fluid escaping under
pressure can have sufficient force to penetrate the
skin and cause serious injury.
• Before disconnecting or performing any work on
the hydraulic system, all pressure in the system must
be relieved by stopping the engine and lowering the
cutting units to the ground.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting
units, attachments, and any moving parts. Keep
everyone away.
• Do not overspeed the engine by changing governor
settings. To ensure safety and accuracy, have an
Authorized Toro Distributor check the maximum
engine speed with a tachometer.
• The engine must be shut off before checking the oil
or adding oil to the crankcase.
• Make sure that the mower fuel tank is empty if the
machine is to be stored in excess of 30 days. Do
not store the mower near any open flame or where
gasoline fumes may be ignited by a spark.
• Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or if assistance is desired, contact an
Authorized Toro Distributor.
• To make sure of optimum performance and
continued safety certification of the machine, use
only genuine Toro replacement parts and accessories.
Replacement parts and accessories made by other
manufacturers could be dangerous, and such use
could void the product warranty.
5