Specifications; General Specifications; Optional Equipment - Toro 30555 Operator's Manual

93-7819
1. Remove the ignition key before changing the height-of-cut.
2. Height-of-cut

Specifications

General Specifications

Width of Cut
Height of Cut
Blade Tip Speed
Cutting Blades
Pneumatic Wheels
Drive System
Note: Specifications and design subject to change without notice.

Optional Equipment

Rear Weight Kit
High Sail Blade
Extra High Sail Blade
Atomic Blade
Grass Collection System
Blower Kit
Phenolic Castor Wheels
use with Spanner or
Castor Fork and
3/4 in. Bolts
51-3/4 in. (1.314 m)
Adjustable from 1 to 4 in. (25 to 102 mm) in 1/2 inch (13 mm) increments
15,525 ft./min. @ 3250 engine RPM
3 heat-treated steel blades, each 3/16 in. (4.8 mm) thick and 18 in. (457 mm) long
8 in. (203 mm) diameter greaseable roller bearings (inflated to 20–30 psi
[138–207 kPa])
PTO driven gear box transmits power through a "AA" section belt to all blade
spindles.
Part No. 24-5780
Part No. 44-5480
Part No. 56-2390
Part No. 104–1301
Model No. 30502
Part No. 27-1050
Part No. 69-8980
Part No. 40-0370
Part No. 328-9
99–5171
7