Connect Speaker Leds; Connect Power - Philips FWM9000 User Manual

Connect the rear speakers
3
Find "REAR SPEAKERS" sockets in gray on
the main unit.
4
Insert the connector of the rear right
speaker wire to "R", and the connector of
the rear left speaker wire to "L".
Connect the subwoofers
5
Find "SUB WOOFER" sockets in blue on
the main unit.
6
Insert the connector of the right
subwoofer to "R", and the connector of the
left subwoofer wire to "L".

Connect speaker LEDs

1
Find a LED socket on the back of the main
unit.
2
Insert the connector of the LED wire to
the LED socket.
3
Follow the steps above to connect the rest
speaker LEDs.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage set on the voltage
selector on the bottom of the unit.
•
Ensure that the power supply socket used can
support at least 10A current loading.
•
Before connecting the AC power cord, ensure that you
have completed all other connections.
1
If your power supply voltage is 110V-127V,
adjust the voltage selector (locate on the
bottom of the unit) to 110V-127V.
2
Connect the AC power cable to the wall
socket.
EN
11