Philips AVENT SCF860/20 Manual page 12

EngliSh
12
Problem
The lid of the
blender beaker
leaks.
The wet mill
vibrates strongly,
produces a lot of
noise or the blade
unit is out of
alignment.
The wet mill leaks.
Possible cause
You let the appliance operate
too long without interruption.
You have not placed the lid
properly.
The sealing ring is not or not
properly placed in the blender
beaker lid.
There is too much food in the
blender beaker.
You have not assembled the
blade unit properly onto
the wet mill beaker.
The food in the wet mill
beaker blocks the blades.
The sealing ring is not or not
properly placed on the blade
unit.
Solution
Do not operate the blender for more
than 1 minute at a time. Do not operate
the wet mill for more than 30 seconds at
a time.
Make sure the lid of the blender beaker
has been properly placed.
Put the sealing ring properly in the
blender beaker lid.
Switch off the appliance and process a
smaller quantity.
Screw the blade unit properly onto
the wet mill beaker.
Remove the food that blocks the blade
and/or process a smaller quantity.
Unplug the appliance. Remove the blade
unit and assemble the rubber
ring properly onto the blade unit.