Using WPS to Connect to a Network
If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect
your product to the network.
1. Press the WPS button on your router.
2. On the product, press the
3. Press the left or right arrow button, select Wi-Fi Setup and then press OK.
4. Press the up or down arrow button, select Push Button Setup (WPS), and press OK.
5. Follow the instructions on the LCD screen to complete WPS setup.
Parent topic:
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the
2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.
home button, if necessary.
Wi-Fi Protected Setup (WPS)
home button, if necessary.
32