Muting The A-933 (Remote Controller Only); Using Headphones; Using The Tone Controls; Selecting Tone Or Direct Mode - Onkyo A-933 Instruction Manual

*En_A933_02.fm Page 18 Tuesday, January 25, 2005 1:46 PM
Enjoying Audio Sources —Continued
2 Start playback on the selected
component.
3 To adjust the volume, use the
A-933
A-933's Volume control, or the
remote controller's VOLUME
[ ]/[
Turn VOLUME control clockwise to
increase the volume or counterclock-
Remote
wise to decrease the volume.
controller
VOLUME
VOLUME

Muting the A-933 (remote controller only)

You can temporarily mute the output of the A-933.
1 Press the remote controller's
[MUTING] button.
MUTING
The A-933 is muted, and the
STANDBY indicator flashes green.
To unmute the A-933, press the
[MUTING] button again.
Notes:
• The Mute function will be cancelled
if the remote controller's VOLUME
buttons are pressed or the A-933 is
set to Standby.
• When using the A-933 as a power
amplifier (MAIN IN function), the
Muting function has no effect.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch
phone plug) to the A-933's PHONES jack for private
listening.
PHONES
18
] buttons.
STANDBY/ON
ON(G)
STANDBY(R)
POWER SUPER BASS
PHONES A B
ON OFF SPEAKERS
Notes:
• Always turn down the volume before connecting your
headphones.
• All connected speakers are turned off while the head-
phones plug is inserted in the PHONES jack.
• The headphones output no sound while the MAIN IN
function is on.

Using the Tone Controls

While the MAIN IN function is on, the A-933's tone
controls have no effect.
TONE(R)/DIRECT (G)
C D
STANDBY/ON
TUNER
ON(G)
STANDBY(R)
PHONO
POWER SUPER BASS
PHONES A B
ON OFF SPEAKERS MAX
SUPER BASS

Selecting Tone or Direct Mode

The [TONE(R)/DIRECT(G)] button is
used to select Tone or Direct mode.
In Tone mode, the tone controls can be
used to adjust the sound, and the
TONE/DIRECT indicator lights up red
(R).
In Direct mode, the tone controls are bypassed, so you
can enjoy a pure sound. The TONE/DIRECT indicator
lights up green (G).

Adjusting the Super Bass

The SUPER BASS control
adjusts very-low bass sounds.
Turn it up to make them louder.
Normally, it should be fully
turned down.

Adjusting the Bass

The BASS control adjusts bass
sounds. Turn it up to make them
louder. Turn it down to make them
quieter. Normally, it should be set
midway.

Adjusting the Treble

The TREBLE control adjusts treble
sounds. Turn it up to make them
louder. Turn it down to make them
quieter. Normally, it should be set
midway.
M D
LINE TAPE /CDR
BASS TREBLE
TO N E ( R ) MAIN IN
DIRECT (G )
TREBLE
BASS
TONE(R)
DIRECT(G)
SUPER BASS
MAX
BASS
TREBLE