Table of Contents
Advertisement
CAUTION
If the engine has been running, the muffler will be
hot and can severely burn you. Keep away from the
hot muffler.
Adjust the cutting height as desired. Set all four wheels to
the same height.
Note: To raise the machine, move all 4 cutting height levers
forward; to lower the machine, move them all rearward
(Figure 15).
Figure 15
Note: The cutting height settings are 25 mm (1 in); 38 mm
(1-1/2 in); 51 mm (2 in); 64 mm (2-1/2 in); 76 mm (3 in); 89
mm (3-1/2 in); 102 mm (4 in); and 114 mm (4-1/2 in).
Adjusting the Upper Handle
Height
You may raise or lower the upper handle to a position
comfortable for you.
Note: You cannot raise the upper handle higher than the
angle of the lower handle.
1. Loosen the upper-handle knob (Figure 16).
2. Move the upper handle to the desired position (Figure
17).
3. Tighten the upper-handle knob firmly (Figure 19).
10
Figure 16
Figure 17
Figure 18
Advertisement
Table of Contents
