General Operation; Slope Operation - Toro 74141 Operator's Manual

General Operation

•
Be sure that the area is clear of bystanders before mowing.
Stop the machine if anyone enters the area.
•
Do not touch equipment or attachment parts which may
be hot from operation. Allow all of the parts to cool
before attempting to maintain, adjust, or service the
machine.
•
Use only Toro-approved attachments. Warranty may be
voided if used with any unapproved attachments.
•
Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires, etc.) before operating under
any objects, and do not contact them.
•
Slow down before making turns and use extra caution.
•
Use caution when riding the platform over curbs, rocks,
roots, or other obstructions.
•
Look behind and down before backing up to ensure a
clear path. Use extra care when operating in reverse.
•
Do not jerk the controls; use a steady motion.
•
When loading or unloading the machine, use one
full-width ramp that is wide enough to extend beyond
the width of the machine.
•
Do not carry passengers.
•
Do not carry equipment on the machine.

Slope Operation

All slopes and ramps require extra caution. If you feel uneasy
on a slope, do not mow it.
•
Remove obstacles such as rocks, tree limbs, etc. from the
mowing area.
•
Watch for holes, ruts or bumps.
Note: Tall grass can hide obstacles.
•
Use caution near drop-offs, ditches, or embankments.
Note: The machine could suddenly turn over if a wheel
goes over the edge of a cliff or ditch, or if an edge caves in.
•
Use extra care with grass catchers or other attachments.
Note: These can change the stability of the machine.
•
Keep all movement on slopes slow and gradual.
•
Do not make sudden changes in speed or direction.
•
Mow slopes side to side.
•
Do not mow slopes greater than 20 degrees.
Using the Rollover Protection System
(ROPS)
•
The ROPS is an integral and effective safety device. Keep
the ROPS in the raised and locked position and use the
seat belt when operating the machine.
•
Lower the ROPS temporarily only when absolutely
necessary. Do not wear the seat belt when the ROPS is
folded down.
•
Be aware there is no rollover protection when the ROPS
is in the down position.
•
Be certain that the seat belt can be released quickly in
the event of an emergency.
•
Check the area to be mowed and never fold down the
ROPS in areas where there are slopes, drop offs or water.
•
Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires) before driving under any
objects and do not contact them.
•
Keep the ROPS in safe operating condition by
periodically thoroughly inspecting for damage and
keeping all mounting fasteners tight.
•
Replace a damaged ROPS. Do not repair or revise.
•
Do not remove the ROPS.
•
Any alterations to a ROPS must be approved by the
manufacturer.
Service
•
Do not store the machine or a fuel container inside where
there is an open flame, such as near a water heater or
furnace.
•
Keep the nuts and bolts tight, especially the
blade-attachment bolts.
•
Never interfere with the intended function of a safety
device or reduce the protection provided by a safety
device. Check their proper operation regularly.
•
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro delivers
replacement parts designed to the exact engineering
specifications of our equipment. For peace of mind, insist
on Toro genuine parts.
•
Check brake operation frequently. Adjust and service as
required.
6