Data Usage Settings - Alcatel DAWN User Manual

Bluetooth Settings Operations
Enable Bluetooth: In Bluetooth settings, tap the slider
n
When enabled, confirmation appears for your phone to be discoverable by other devices.
l
Follow the onscreen instructions.
Tap to enable and
l
Alternatively, tap Bluetooth >
l
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
n
Bluetooth settings, tap the device name in "Available devices" and follow the onscreen
instructions.
Depending on the device, you may be required to enter or accept a passkey.
l
If the target device does not appear, tap Refresh to search again.
l
This setting is available when Bluetooth is enabled.
l
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
n
paired device name, tap Name, enter a new name, and tap OK.
Emoji cannot be used in a device name.
l
This setting is available when Bluetooth is enabled.
l
Cancelling Pairing: From Bluetooth settings, tap Settings
n
and then tap FORGET.
This setting is available when Bluetooth is enabled.
l
Enable Service from Paired Device: From Bluetooth settings, tap Settings
n
paired device name, and then mark Internet access or Contact sharing.
Search for Other Devices: From Bluetooth settings, tap Menu > Refresh.
n
This setting is available when Bluetooth is enabled.
l
Check Files Received via Bluetooth Transfer: From Bluetooth settings, tap Menu >
n
Show received files, and follow the onscreen instructions.
DATA USAGE SETTINGS
The data usage menu lets you view your phone's mobile and Wi-Fi data usage, set data limits,
restrict hotspot usage, and more.
Settings Connections Settings
to disable.
or .
or .
next to a paired device name,
next to a
next to a
155