Alcatel DAWN User Manual page 113

1. From home, tap Apps
2. Tap Wi-Fi
.
The Wi-Fi settings menu appears.
3. Tap the Wi-Fi slider to turn Wi-Fi on
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the slider again
l
4. Tap a Wi-Fi network to connect, enter the password (if it's not an open network), and then tap
Connect.
Your phone is connected to the Wi-Fi network. You will see (
The password, for a household wireless LAN router, is sometimes found on a sticker on the
l
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
l
Note: The next time your phone connects to a previously accessed secured wireless network, you
will not be prompted to enter the password again, unless you reset your phone to its factory default
settings or you instruct the phone to forget the network.
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your
phone to connect to a Wi-Fi network. It may be necessary to provide a user name and password for
certain closed wireless networks.
Making Connections Connectivity
> Settings .
.
.
) in the status bar.
106