Onkyo SKC-340C Instruction Manual page 13

HT-S590_En.book Page 13 Wednesday, February 1, 2006 4:26 PM
Remote Controller —Continued
For detailed information, see the pages in parentheses.
A
ON/STANDBY button (34)
This button is used to set the AV receiver to On or
Standby.
B
INPUT SELECTOR buttons (36)
These buttons are used to select the input sources.
C
MULTI CH button (37)
This button is used to select the multichannel DVD
input.
D
DIMMER button (42)
This button is used to adjust the display brightness.
E
CH +/– button (39)
This button is used to select radio presets.
F
SP A/B button (36)
This button is used to turn speaker sets A and B on
or off.
G
Arrow [ ]/[ ]/[ ]/[
(48, 50–53)
These buttons are used to select and adjust settings.
H
RETURN button (48, 50, 51, 53)
This button is used to return to the previous display
when changing settings.
I
LISTENING MODE buttons (46)
These buttons can be used to select listening modes
regardless of the currently selected remote control-
ler mode.
STEREO button
This button selects the Stereo listening mode.
SURROUND button
This button selects the Dolby and DTS listening
modes.
[ ]/[ ] buttons
These buttons can be used to select any of the avail-
able listening modes.
J
TEST TONE, CH SEL, LEVEL- & LEVEL+
buttons (34, 44, 51)
These buttons are used to adjust the level of each
speaker.
K
DISPLAY button (37)
This button is used to display various information
about the currently selected input source.
L
REMOTE MODE buttons (12)
These buttons are used to select the remote control-
ler modes. When you press a button on the remote
controller, the REMOTE MODE button for the cur-
rently selected mode lights up.
M
SLEEP button (43)
This button is used to set the Sleep function.
N
VOL [ ]/[ ] button (36)
This button can be used to adjust the volume of the
AV receiver regardless of the currently selected
remote controller mode.
] & ENTER buttons
O
MUTING button (43)
This button is used to mute the AV receiver.
P
SETUP button (48, 50–53)
This button is used to access various settings.
Q
CINE FLTR button (49)
This button is used to set the CinemaFILTER func-
tion.
R
L NIGHT button (49)
This button is used to set the Late Night function.
S
OR-EQ button (43)
This button is used to turn on the OptiResponse
Equalizer, which optimizes performance when the
HT-R340 is used with the speakers included in the
HTP-340 Home Theater Speaker Package. When
the OptiResponse Equalizer is on, you can enjoy a
powerful sound with movies or music even at low
volume levels.
13