EnGenius EAP300 User Manual page 67

SNMP
SNMP Enable/Disable
Contact
Location
Community Name (Read Only)
Community Name (Read/Write)
Trap
Trap Destination Address
Trap Destination Community
Name
SNMPv3
SNMPv3 Enable/Disable
User Name
Auth Protocol
Auth Key
Priv Protocol
Priv Key
Engine ID
Save/Apply / Cancel
Enable or Disable SNMP feature.
Specify the contact details of the device
Specify the location of the device.
Specify the password for the SNMP community for read only access.
Specify the password for the SNMP community with read/write access.
Specify the IP address of the computer that will receive the SNMP traps.
Specify the password for the SNMP trap community.
Enable or Disable SNMPv3 feature.
Specify the username for SNMPv3.
Select the authentication protocol type: MDS or SHA.
Specify the authentication key for authentication.
Select the privacy protocol type: DES.
Specify the privacy key for privacy.
Specify the engine ID for SNMPv3.
Click Save/Apply to apply the changes or Cancel to return previous settings.