Introduction - Toro 08703 Operator's Manual

Traction units
Hide thumbs Also See for 08703:
Table of Contents

Advertisement

This product complies with all relevant European directives,
for details please see the separate product specific Declaration
of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Important: This engine is not equipped with a spark
arrester muffler. It is a violation of California Public
Resource Code Section 4442 to use or operate the engine
on any forest-covered, brush-covered, or grass-covered
land. Other states or federal areas may have similar laws.
This spark ignition system complies with Canadian ICES-002.
The enclosed Engine Owner's Manual is supplied for
information regarding the US Environmental Protection
Agency (EPA) and the California Emission Control
Regulation of emission systems, maintenance, and
warranty. Replacements may be ordered through the
engine manufacturer.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Introduction

This machine is a ride-on piece of utility equipment intended
to be used by professional, hired operators in commercial
applications. It is primarily designed for conditioning sand
traps on well-maintained golf courses and commercial
grounds.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. These numbers are stamped into a plate
located on the left frame rail. Write the numbers in the space
provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 1),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
Figure 1
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

08705Sand pro 5040Sand pro 3040

Table of Contents