Turning On The Av Receiver; Turning On And Standby - Onkyo HT-R667 Instruction Manual

Turning On the AV Receiver

ON/STANDBY
STANDBY indicator
ON/STANDBY
STANDBY
DOCK MULTI CH DVD
PHONES
A SPEAKERS B TONE

Turning On and Standby

The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the
composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the HT-R667's own display
when changing settings.
Remote
AV receiver
controller
ON/STANDBY
or
Up and Running in a Few Easy Steps
To get your system up and running with the minimum of fuss, here's a few pointers to help you configure the AV
receiver before you use it for the very first time. These settings only need to be made once.
■ Do the automatic speaker setup—this is essential!
See "Automatic Speaker Setup" on page 42.
■ Did you connect a component to an HDMI input,
component video input, or digital audio input?
If you did, see "HDMI Input Setup" on page 46, "Component Video
Input Setup" on page 47, or "Digital Input Setup" on page 47 respec-
tively.
■ Did you connect an Onkyo MD recorder or CD recorder?
If you did, see "Changing the Input Display" on page 48.
TUNING PRESET
ENTER
VCR/DVR CBL/SAT AUX TAPE TUNER CD SETUP RETURN
AUX INPUT
SETUP MIC VIDEO L
MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE
LISTENING MODE CLEAR
On the AV receiver, press the [ON/STANDBY] button.
On the remote controller, press the [RECEIVER] REMOTE MODE button,
followed by the [ON/STANDBY] button.
The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote
controller's [ON/STANDBY] button. The AV receiver will enter Standby mode. To
prevent any loud surprises the next time you turn on the AV receiver, turn down the
volume before you turn it off.
ON/STANDBY
MASTER VOLUME
RECEIVER
AUDIO R
HT-R667
AV RECEIVER
HDMI
OUT IN
TAPE
Y
COAXIAL
P
B
P
R
OPTICAL
MD recorder, CD recorder
41