Figure 97
1. Clutch pulley
2. Mower-deck belt
3. Spring-loaded idler pulley
4. Ensure that the belt-guide
tab hits against the pivot
hub.
7. Remove and retain the hardware on both sides of the
deck as shown in
Figure
5. Belt guide
6. Spring-loaded idler pulley
7. Square hole in the idler
arm for the ratchet
8. Spring
97.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the up
position.
9. Slide the deck out to the right side of the machine.
63
g024670
Figure 98