Toro 74942TE Operator's Manual page 11

125-9384
1. Read the Operator's
Manual for information on
lubricating the idler-pulley
pivots.
2. Lubricate the spindles
every 50 operating hours.
126-2055
1. Wheel lug nut torque 129 N∙m (95 ft-lb) (4x)
2. Wheel hub nut torque 319 N∙m (235 ft-lb)
3. Read and understand the Operator's manual before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
3. Counter clockwise rotation
4. Clockwise rotation
1. Attention—read the
Operator's Manual.
2. Remove the nut by turning
it clockwise.
1. Warning—read the
Operator's Manual.
1. Maximum drawbar pull 36
kg (80 lb)
11
127-6662
3. Remove the bolt by turning
it counter clockwise.
127-6663
2. Crushing hazard—1)
Engage the parking brake,
shut off the engine, and
remove the key from
the ignition; 2) Jack
the machine using a
manufacturer-approved
jack, and always use a
jackstand.
131-4036
2. Read the Operator's
Manual.