Toro 74942TE Operator's Manual page 38

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark
A
C
E
Figure 48
6. Start the engine and drive to a flat area.
7. Check the oil level again.
(Figure 48).
B
D
F
g027660
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note: Change the engine-oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to
Engine Oil (page
2. Change the engine-oil filter
A
C
E
g027477
Note: Ensure that the oil-filter gasket touches the
engine, and then the oil filter an extra 3/4 turn.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Engine Oil (page
38
Changing the
37).
(Figure 49).
B
D
F
3/4
Figure 49
37).
g024213