Maintenance; Recommended Maintenance Schedule - Toro 74401 Operator's Manual

Hide thumbs Also See for 74401:
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first use
Each use
Every 5 hours
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 300 hours
Before storage
1
More often in dusty, dirty conditions
Important
Refer to your engine operator's manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug(s) before you do
any maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
Change the engine oil.
Check the engine oil level.
Check the safety system.
Clean the air intake screen.
Clean the mower housing.
Check the cutting blades.
Grease all lubrication points.
Oil the linkage bushings.
Service the foam air cleaner.
Check the belts for wear/cracks.
Check the battery electrolyte.
Check the tire pressure.
Service the paper air cleaner.
Change the engine oil.
Check the spark plug(s).
Change the oil filter.
Replace the fuel filter.
Replace the paper air cleaner.
Clean the engine shrouds and cooling fins.
Perform all maintenance procedures listed above before storage.
Drain the fuel tank.
Charge the battery and disconnect the battery cables.
Paint any chipped surfaces.
Caution
19
1
1
1
1
1
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z17-44 timecutter

Table of Contents