Maintenance; Recommended Maintenance Schedule(S) - Toro 30069 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 25 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Before storage
Important: Refer to your engine operator's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition and disconnect the spark plug wire from the spark plug(s) before you do
any maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Check the mower belt tension.
• Check the hydraulic fluid level.
• Replace the hydraulic oil filter.
• Check the mower belt tension.
• Check the safety system.
• Grease the caster wheels and caster pivot.
• Clean the air intake screen.
• Inspect the blades.
• Clean the mower deck.
• Clean foam air cleaner element.
• Check the hydraulic fluid level.
• Grease the mower belt idler.
• Grease the pump drive idler pivot.
• Grease the pump control.
• Check the paper air cleaner element.
• Check the tire pressure.
• Check the belts.
• Check the mower belt tension.
• Grease the blade engagement bellcrank.
• Check the spark plugs.
• Check hydraulic lines and hoses.
• Replace the paper air cleaner element.
• Replace the fuel filter.
• Replace the hydraulic oil filter.
• Lubricate the cam lock with Never-Seez®.
• Paint chipped surfaces.
• Perform all maintenance procedures listed above before storage.
22