Wall Mount; Product Specifications - Philips HTL5160B User Manual

7 Wall mount

Note
•
Before wall mounting, make sure the wall can support
the weight of this product.
•
For wall mounting, this product must be securely
attached to the wall in accordance with the installation
instructions. Improper wall mounting may result in
accident, injury or damage. If you have any query,
contact Consumer Care in your country.
Screw length/diameter
Depending on the type of wall mounting this
product, make sure that you use screws of a
suitable length and diameter.
2.2~2.5 mm/0.09"- 0.10"
≤9 mm/
0.35"
>25 mm/0.98"
See the illustration in the quick start guide on
how to wall mount this product.
1) Use the supplied paper marker to mark two
holes on the wall, then secure two suitable
screws in the holes.
2) Fix the two supplied wall brackets on this
product.
3) Hang this product on the wall.
18 EN
8 Product
Amplifier
•
•
•
•
3.5-4 mm/
0.14"-0.16"
Audio
•
USB
•
•
•
File formats
•
Bluetooth
•
•
specifications
Note
•
Specifications and design are subject to change without
notice.
Total output power: 320W RMS
(+/- 0.5 dB, 10% THD)
Frequency response:
20 Hz-20 kHz / +/- 3 dB
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
Input sensitivity:
• AUDIO IN: 1 V
S/PDIF Digital audio input:
• Optical: TOSLINK
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16, FAT32, NTFS
.aac, .mka, .mp3, .wav, .m4a, .flac, .ogg, .ape,
.dsf, .dff
Bluetooth profiles: A2DP, AVRCP
Bluetooth version: Bluetooth V4.1 with
Bluetooth Low Energy