Wireless Subwoofer; Connect; Network Setup Prompt - Philips HTL5160B User Manual

Hide thumbs Also See for HTL5160B:
Table of Contents

Advertisement

Wireless subwoofer

This product comes with a wireless subwoofer.
a
b
c
a Subwoofer indicator
When the power is turned on, the
indicator lights up.
During wireless pairing between the
subwoofer and the main unit, the
indicator blinks white quickly.
When the pairing succeeds, the
indicator lights up white.
When the pairing fails, the indicator
blinks white slowly.
When wireless connection is
disconnected for 1 minute, the
indicator turns off.
b CONNECT (connect)
Press to to enter the pairing mode for the
subwoofer.
c AC MAINS~
Connect to the power supply.

3 Connect

This section helps you connect this product to a
TV and other devices.
For information about the basic connections of
this product and accessories, see the quick start
guide.
Note
For identification and supply ratings, see the type plate
at the back or bottom of the product.
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.

Network setup prompt

When this product is turned on for the first time,
or this product is not connected to the network,
you are prompted to set up the network to
stream music from the online music apps.
» SETUP (setup) is displayed on the display
panel of this product.
» White LED on this product blinks.
To initialize network setup, see "Google
Cast™ and Spotify Connect".
To skip network setup, select other audio
input source.
EN
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents