Toro 30809 Operator's Manual page 35

2. Raise the cutting decks to the transport position.
3. Set the parking brake and turn off the machine.
4. Release the latch rod (Figure 35) from front carrier
frame retainer.
Figure 35
1. Service latch hook
5. Lift the outside of the front cutting decks and place the
latch over the frame pin mounted on the front of the
operator's platform (Figure 35).
6. Sit on the operator seat and start the traction unit.
7. Lower the cutting decks to the mow position.
8. Turn off the machine and remove the key.
9. Reverse this procedure to unlatch the cutting decks.
35