Table of Contents
Advertisement
Setup
Note: Determine right and left side of the machine from
normal operating position.
1
Assembling the Handle
No Parts Required
Procedure
1. Slide the lower handle into the frame (Figure 3).
2
1
g017374
2. Secure each side with a retaining pin and a haripin
(Figure 3).
3. Secure the footstop to the right side of the lower handle
using an M6 nut, and M6 bolt, and 2 washers (Figure 3).
4. Attach the footstop to the frame with a retaining pin
and a hairpin (Figure 3).
5. Connect the upper handle to the lower handle by
securing each side with a U bolt, an M6 washer, and a
handwheel (Figure 4).
3
5
6
Figure 3
1
2
1. Upper handle
2. Hand wheel
3. Washer
2
Filling the Engine with Oil
No Parts Required
4
Procedure
Important: Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
Max. fill: 0.59 l (20 oz.), type: SAE 30 or SAE 10W-30
detergent oil with an API service classification of SF, SG, SH,
SJ, SL, or higher.
1. Move the machine to a level surface.
2. Remove the dipstick (Figure 5).
6
g017373
5
4
3
Figure 4
4. U bolt
5. Lower handle
Advertisement
Table of Contents
