Table of Contents
Advertisement
Figure 5
1. The oil level is at its
maximum.
2. The oil level is too
high—remove oil from
the crankcase.
3. Slowly pour oil into the oil fill hole, wait 3 minutes,
and check the oil level on the dipstick by wiping the
dipstick clean and then inserting, but not screwing in,
the oil fill cap into the hole (Figure 6).
g017532
Figure 6
Note: Fill the engine crankcase with oil until the
dipstick indicates that the engine oil level is correct
as shown in Figure 5. If you overfill the engine with
oil, remove the excess oil as directed in Changing the
Engine Oil.
4. Install the dipstick and hand tighten it securely.
Important: Change the engine oil after the first 5
operating hours ; change it yearly thereafter. Refer
to Changing the Engine Oil.
g017530
3. The oil level is too
low—add oil to the
crankcase.
Product Overview
1. Handle
2. Engine stop handle
3. Switch box
5
4
3
2
1. Spark plug
2. Exhaust guard
3. Exhaust
4. Dipstick
5. Finger guard
6. Starter grip
7
Figure 7
4. Handlebar securing knob
5. Footstop
6
1
11
g017377
Figure 8
7. Fuel cap vent knob
8. Fuel cap
9. Choke lever
10. Air cleaner
11. Carburetor
7
8
9
10
Advertisement
Table of Contents
