Replacing The Fuel Filter - Toro 30031 Operator's Manual

Figure 30
1. Fuel shut-off valve

Replacing the Fuel Filter

Service Interval: Every 200 hours/Yearly (whichever
comes first)
Never install a dirty filter if it is removed from the fuel
line.
Note: Note how the fuel filter is installed.
Note: Wipe up any spilled fuel.
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Close fuel shut-off valve at fuel tank (Figure 30).
Note: Remove the fuel line from the fuel valve that
is closest to the engine.
4. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 31).
2. Clamp
1. Hose clamp
2. Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps close
to the filter.
7. Open fuel shut-off valve at fuel tank (Figure 30).
8. Check for fuel leaks and repair if needed.
28
Figure 31
3. Filter