Using The Drive Wheel Release Valves - Toro Z Master 74941CP Operator's Manual

1. To adjust, move the lever sideways to unlock seat
(Figure 32).
2. Slide the seat to the desired position and release
lever to lock in position.
Changing the Seat Suspension
The seat can be adjusted to provide a smooth and
comfortable ride. Position the seat where you are most
comfortable.
To adjust it, turn the knob in front either direction to
provide the best comfort (Figure 32).
Adjusting the Armrest Position
The armrests can be adjusted to provide a smooth and
comfortable ride. Position the armrests where you are
most comfortable.
To adjust it, lift the armrests and turn the knob in either
direction to provide the best comfort (Figure 32).
Changing the Back Position
The back of the seat can be adjusted to provide a
comfortable ride. Position the back of the seat where it
is most comfortable.
To adjust it, turn the knob, under the right-side arm
rest, in either direction to provide the best comfort
(Figure 32).
1. Back rest knob
2. Seat position adjustment
lever
Using the Drive Wheel Release
Valves
WARNING
Hands may become entangled in the rotating drive
components below the engine deck, which could
result in serious injury.
Stop the engine, remove the key, and allow all
moving parts to stop before accessing the drive
wheel release valves.
WARNING
The engine and hydraulic drive units can become
very hot. Touching a hot engine or hydraulic drive
units can cause severe burns.
Allow the engine and hydraulic drive units to cool
completely before accessing the drive wheel release
valves.
25
Figure 32
3. Right-side arm rest
4. Armrest adjustment knob