Bagging The Clippings - Toro 22155 Operator's Manual

Figure 25
1. Top of recycle plug lever in switch channel

Bagging the Clippings

Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side discharge chute is on the mower, remove it
and lock the side discharge door (refer to Removing the
Side Discharge Chute) before bagging the clippings.
WARNING
A worn grass bag could allow small stones
and other similar debris to be thrown in the
operator's or bystander's direction and result in
serious personal injury or death to the operator or
bystanders.
Check the grass bag frequently. If it is damaged,
install a new Toro replacement bag.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
Installing the Grass Bag
1. Remove the recycle plug (Figure 26).
2. Insert the grass bag handle into the grooves at the
top of the mower.
Important: The mower has a safety switch that
prevents you from starting the mower unless
you first install the grass bag securely on the
mower.
Removing the Grass Bag
1. Lift the grass bag handle out from the grooves at
the top of the mower and remove the bag from the
mower (Figure 27).
14
Figure 26