For details on how to use the MDC
programme, refer to Help after installing
the programme. The MDC programme is
available on the website.
MDC installation can be affected by the
graphics card, mother board and network
conditions.
If the directory path is not specified, the
programme will be installed in the default
directory path.
"Launch MDC
Unified" and click
Select
"Finish" to run the MDC programme
immediately.
- The MDC execution icon may not be
displayed depending on the PC system
or product specifications.
- Press F5 if the execution icon is not
displayed.
MDC Programme Installation/Uninstallation
Installation
1
Click the MDC Unified installation programme.
2
Select a language for installation. Next, click "OK".
3
"Welcome to the InstallShield Wizard for
When the
4
In the
"License
Agreement" window displayed, select
5
Information" window, fill out all the information fields and click "Next".
In the displayed
"Customer
6
In the displayed
"Destination
Folder" window, select the directory path you want to install the programme in and click "Next".
7
"Ready to Install the
In the displayed
8
Installation progress will be displayed.
9
Click "Finish" in the displayed
"InstallShield Wizard
10
The MDC Unified shortcut icon will be created on the desktop after installation.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
MDC_Unified" screen appears, click "Next".
"I accept the terms in the license
Program" window, check the directory path to install the programme in and click "Install".
Complete" window.
agreement" and click "Next".
41